پایان نامه آنالیز دیوار برشی غیر صلب با استفاده از مدلسازی به روش عضو خرپایی
در بخش پایان نامه های رشته مهندسی عمران این بار به معرفی پایان نامه آنالیز دیوار برشی غیر صلب با استفاده از مدلسازی به روش عضو خرپایی می پردازیم که از موضوعات به روز دنیا برای کار تحقیقاتی در مقطع کارشناسی ارشد و دکتری است. این پایان نامه در دانشگاه Heriot-Watt انگلستان دفاع شده و نمره عالی کسب نموده است. در ادامه به معرفی خلاصه و فهرست مطالب این پایان نامه می پردازیم.
دانشگاه: Heriot-Watt – UK
زبان: انگلیسی
سال دفاع: 2015
فرمت: PDF
تعداد صفحه: 68
مقطع: کارشناسی ارشد
خلاصه مطلب پایان نامه آنالیز دیوار برشی غیر صلب
این مطالعه با استفاده از ABAQUS (نسخه 6.14) و تحت بارگذاری یکبار فشار “تحرکی” به کار گرفته شده از عناصر خرپا به عنوان روشی ساده برای مدل سازی یک SPSW نازک بدون استنباط بررسی شده است. چندین مدل خرپا از طریق تغییر دو پارامتر ، تعداد خرپا و عرض موثر برای بررسی رفتار آنها در برابر آن در مدل صفحه مورد بررسی قرار گرفت. تجزیه و تحلیل غیر خطی هندسی و مادری (GMNLA) دنبال شده و اثرات انحراف بزرگ در نظر گرفته شده است.
This study investigated analytically the using of truss-elements as a simplified method to model an unstiffened thin SPSW, by means of ABAQUS (Ver. 6.14) and under monotonic “pushover” loading. Several truss-elements models had been evaluated through changing two parameters, the number of the trusses and the effective width, to verify their behaviour against that at the plate model. Geometrically and Materially Non- Linear Analysis (GMNLA) had been followed and large-deflection effects were taken into account.
It was found that the truss-elements model required an odd number of trusses (1, 3 or 5), with one truss connecting the two opposite corners (diagonal truss), as well the required truss width was slightly more than the truss spacing in the model. On the other hand, the initial stiffness of the truss-elements models was generally lower than that at the plate model.
فهرست مطالب:
- Introduction
- Design for seismic
- Structural seismic resisting systems
- Introduction to steel plate and its behavior as shear wall
- Advantages and disadvantages of using SPSWs system
- The importance and problem of this research
- Aim and Objectives
- Dissertation contents
- Literature review
- Introduction
- Ductile and brittle performance of structure
- Seismic behaviour of reinforced concrete shear walls (RCSWs)
- Behaviour of steel plates
- Elastic critical stress of thin plate
- Modeling of steel plate in analysis
- Finite-element and simplified models of SPSW investigated by Driver et al. (1998)
- Analysis of SPSWs using the modified strip model studied by (Shishkin et al. 2009)
- Hysteretic analysis of SPSWs using a modified strip model studied by (Guo et al. 2009)
- Simplified equivalent braced frame model for SPSW by (Chatterjee et al. 2015)
- Summary of this chapter
- Finite element analysis procedure
- Introduction
- Verification model of the steel plate “ Verified Model”
- Finite-element analysis of the verified model
- Finite-element analysis for the modified model
- Finite-element analysis for the equivalent truss-elements model
- Conclusions
- Conclusions from finite element analysis
- Recommendations for future works
دانلود فهرست مطالب
برای دانلود فهرست کامل مطالب به همراه جزئیات پایان نامه آنالیز دیوار برشی غیر صلب با استفاده از مدلسازی به روش عضو خرپایی روی دکمه زیر کلیک کنید.
همچنین در صورت انتقاد و یا پیشنهاد میتوانید از قسمت تماس با ما و یا تیکت پششتیبانی در حساب کاربری خود با گروه مهندسی ساخت و اجرا در ارتباط باشید.
دستهبندی پایاننامه | مهندسی عمران |
---|---|
مقطع تحصیلی | کارشناسی ارشد |
سال | ۲۰۱۵ |
زبان | انگلیسی |
کشور | انگلستان |
تعداد صفحه | 68 |
فرمت فایل |
4.8/5 - (10 امتیاز)
برچسب: پایان نامه های رشته عمران پایان نامه های کارشناسی ارشد دانلود پایان نامه ارشد دیوار برشی کارشناسی ارشد مهندسی عمران
محصولات مشابه
پایان نامه طراحی، ساخت و آزمایش دستگاه سختی متغیر برای جداسازی لرزه ای

پشتیبانی فنی سایت
۱۲,۰۰۰ تومان
قوانین ثبت دیدگاه